1. suitable for thick 3 ~ 20 mm, maximum width of 2440 mm plate glass cleaning (unlimited length) Max specification 400×400mm

2. cleaner on roller brush roll weather knife can be in the same lifting gear in ascension or decrease (electric ascension) can promote the highest 400 mm (facilitate maintenance or repair。

3. ascension or falling clearance can be produced according to the thickness of the glass by digital display table presetting and display gap size

4. cleaning part contact to the place where water use stainless steel material production

5. fan with 15 kw high pressure fan independent installed in the upper, reduce cover an area of an area, reduce dust pollution

6. air inlet by air filter unit, fan housing upset sound absorbing material, make noise control in 80 db below

7. wind pressure and air volume can satisfy the linear speed 6 m/min, the glass can blow dry

8. the cleaning water each have independent water pump, the water tank is equipped with automatic water device, the tank bottom is equipped with wheels, easy to clean out quick pipe connector, facilitate change water remove pipe

9. in clean the tablet is equipped with stainless steel holder water pond, prevent water back.

10. brush roller drive part with belt drive, fluctuation independently

11. brush roller for whole root design, handling repair exchange convenient, good dynamic equilibrium.

12. per root pressure roller drive for quenching metal bevel gear transmission, drive stability without the noise.

13. operating speed using frequency control of motor speed and display speed per minute

14. electrical material are famous brand in China or a sino-foreign joint venture enterprise products.

15. production capacity: linear velocity in 6 m/min 200 square meters/hour.

16. external dimensions: long, 6.5 meters wide and 3.2 meters high 2.5 meters.